KPMG
KPMG
One of Dublin’s largest
Grade-A fit-outs .
KPMG’s new Irish headquarters at Harcourt Square is one of the largest Grade A office fit-outs delivered in Dublin in recent years. The scheme brings KPMG’s Dublin teams together across two connected blocks running from Lower Ground to Level 8, with open-plan floors, meeting suites, collaboration areas and a central atrium.
The building services design called for a four-pipe fan coil system with pressure-independent control valves throughout, and a ceiling-integrated air terminal package finished to a high architectural standard. Diffusion fancoils fitted with Pettinaroli PICVs and Gilberts grilles were specified by Metec Consulting Engineers and installed by DMG Engineering.
The challenges
Scale and programme. With more than 850 fan coils, 1,700 valves and over 3,500 grilles spread over two blocks and ten floor levels, the package had to be delivered in step with the fit-out programme rather than in one drop. Keane Environmental Ltd supplied a series of phased call-downs, floor by floor and block by block, coordinating build slots at Diffusion and Gilberts with delivery windows on a busy city-centre site.
Bespoke ceiling integration. The architect’s SAS330 metal tile ceiling has a 30 mm tegular drop on its short side. Standard diffusers would not have sat flush, so we worked with Gilberts to develop bespoke GSFC swirl diffusers, borderless PG-R return grilles and GZL linear diffusers with inverted tegular ends, over 2,100 special units in total, so every grille terminal sits cleanly and flush within the ceiling.
Factory-fitted controls and valves. Fitting controllers and PICVs on site to 854 units would have added weeks to the programme. Instead, we coordinated the free issue of controllers and valves to Diffusion’s factory, the selection and pre-setting of every PICV, and the approval of a single overall wiring diagram, so that each unit left the factory fully assembled, wired and labelled to its location.
What we supplied
Fan coil units – Diffusion Highline 27 EC
- 854 Diffusion Highline 27 (H27Bec) ceiling-void fan coil units, four-pipe heating and cooling with EC fan motors
- Nine unit sizes, selected individually to suit each zone’s cooling and heating load and acoustic target
- Water-side control on every unit, with master/slave groupings set up to suit the open-plan layouts
- Client’s free-issue controllers and the PICVs factory-fitted and pre-wired by Diffusion, with an overall wiring diagram approved before manufacture, so units arrived on site ready to hang, pipe and connect
- Integral condensate pumps, relays and 24 V transformers supplied fitted
PICVs – Pettinaroli Vortex 0X4
-
Over 1,700 Pettinaroli Vortex 0X4 PICV valve sets, one on the heating coil and one on the cooling coil of every fan coil
-
Each valve selected and pre-set to the unit’s design flow rate using Pettinaroli’s Rubick selection software, with a full valve schedule issued for commissioning
-
Valves delivered direct to Diffusion and fitted to the units in the factory, removing a significant amount of site pipework and labour
Grilles and diffusers – Gilberts
3,559 Gilberts air terminals (1,916 supply and 1,643 return), all finished in RAL 9010 matt white:
| Product | Quantity | Notes |
|
GZL high-induction linear diffusers |
1,306 | 1,072 bespoke units with inverted tegular ends to suit the ceiling system |
| GSF swirl diffusers (GSFC, GSFE, GSFK) | 979 | 745 bespoke GSFC units made to suit the SAS330 metal ceiling tiles |
| PG-R perforated return grilles | 318 | 306 bespoke borderless units to suit the SAS330 ceiling |
| JSL-A linear slot diffusers | 301 | |
| GSLS-A linear slot diffusers | 3oo | |
| HSL-A linear slot diffusers 214 | 214 | |
| GX / SX disc valves | 90 | WCs and ancillary areas |
| DGB, JN, GSXE and others | 51 |
Ancillaries
• Insulated flexible hoses for every fan coil connection across Blocks A and B
• Condensate pumps integral to the fan coil units
The outcome
KPMG’s new headquarters now benefits from quiet, efficient, individually controlled comfort cooling and heating across both blocks. EC fan motors and pressure-independent valves keep energy use and pumping costs down, while factory-built units and pre-set valves simplified installation and commissioning for DMG Engineering.
Keane Environmental has continued to support the project after handover, supplying additional units and valves for later fit-out phases and working with DMG on site through snagging and commissioning.
Why Keane Environmental
As the Irish distributor for Diffusion fan coils, Gilberts grilles and Pettinaroli valves, Keane Environmental can supply a complete, coordinated terminal package from one source: technical selections, bespoke product development with the manufacturers, phased logistics and on-site support from tender through to handover.
We understand that every job, large or small, has its own challenges. We’d be delighted to work with you to find the correct solution for your building. If you’d like to hear more about this or any of our other projects, contact us today.
Consulting Engineers: DMG Engineering
Suppliers: Keane Environmental Ltd.






